See more Paint
Stonecare4U - Block Paving Sealer Satin (15L) - Protects Block Paving, Solvent-Free, Block Paving Sealant, Reduces Organic Growth
Sold & shipped by Stonecare4U Ltd
Available online only and not stocked in B&Q stores
Product details
Product information
Stonecare4U Block Paving Sealer Satin Finish is a professional sealant for external paving surfaces. The safe, eco-friendly formula is a topcoat protective sealer that creates a durable, crystal-clear satin finish. Essential Block Paving Sealer Satin Finish is quick-drying and easy to apply. It provides high-quality protection that prevents water-based stains and general grime & dirt from penetrating the surface, making it easier to clean and maintain.
Please Note: Essential Block Paving Sealer Satin Finish is likely to change the colour/appearance of some surfaces – always try the product in an inconspicuous area before use. Surfaces that are not to be sealed should be protected with masking material. NOT RECOMMENDED FOR USE ON HIGHLY POLISHED STONE & CERAMIC GLAZED SURFACES.
MAINTENANCE:
Clean sealed areas with a mild, ph neutral cleaner or a very low concentration of our outdoor cleaner range. Do not use harsh or abrasive cleaning agents as this can have a negative effect on the treated surface.
- Guarantee - 6 months
Features and benefits
HOW TO APPLY:
Before use, remove any loose debris from the work surface and ensure adequate safety wear, i.e. gloves, suitable protective eyewear, face mask & clothing.
NOTE: Following the instructions below, perform a small test application in an inconspicuous area prior to use. This will indicate the suitability and effectiveness of the product for your surface. If unsuitable for your requirements, DO NOT PROCEED; contact us to return the product.
Application temperature range: 13° to 23°C
Before application, the surface must be clean and dry, plus ensure favourable weather conditions before commencing.
Apply Essential Block Paving Sealer Satin Finish thinly and evenly with a low-pressure sprayer, micro-fibre mop, paintbrush or soft cloth. Take care not to leave application marks or allow the product to puddle on the surface. DO NOT DILUTE.
Allow 45-60 minutes drying time before applying the second coat, repeating the same process and applying the product in the opposite direction to help to achieve an even consistent finish. If necessary, more coats can be applied to achieve the desired finish.
- Provides a hard-wearing, attractive satin finish that can intensify natural colours and offers high-quality stain protection.
- VOC and Solvent Free.
- Apply undiluted, up to 15m² per litre per coat. Coverage will vary depending on the type of surface application.
Specifications
Application method | Brush, roller or spray |
---|---|
Finish | Satin |
Location | Exterior |
VOC level | No VOC level recorded |
Product code | 5061002780562 |