Orac Decor C832 External Cornice

The C832 Exterior cornice has a bold design which makes it an ideal choice for the façade of an entrance canopy. Each C832 exterior cornice moulding is made from long life lightweight polyurethane, and comes in a pre-finished white paint. Due to ornate shape it is important that this design is installed underneath a roof (or soffit) to avoid water collecting behind the moulding. The C832 exterior cornice is over 9 inches tall, and to get the best results you may wish to purchase an FB300 mitre block if there is a requirement for any 90 degree corners on the installation. The C832 exterior cornice can be fixed using our FDP700 (one tube for every three lengths) and our FX200 for fixing butt joints and mitres (one tube for every 50 lengths). C832 cornice samples are available to order below.

The C832 cornice is supplied in white. If a RAL colour or stone effect is required please contact us for a quotation. If you wish to finish yourself consider the C332 cornice which is made of the same material and supplied with a primer coat of paint.

Install using the correct adhesives. 23cm high x 11.4cm deep x 200cm long.

Made from Light weight resilient polyurethane.