Orac Decor C250F Flexible Premium Coving Moulding 3 Pack

The Orac C250F is a tiny flexible cornice profile which has been designed specifically for people who don't like coving! The discrete design features the classic British concave coving profile but on a very small scale at 1.6 x 1.6cm in height and projection. So if it is so small why use it? Firstly on New Build or refurbished properties small coving profiles are often sufficient for hiding the ugly cracks that appear as newly plastered walls contract. Secondly as a bathroom coving this neat little product acts as a smooth edge when the walls are wiped down to avoid the mould growth that can appear in poorly ventilated and humid conditions. The lightweight polyurethane material can be fitted quickly with FDP500 in dry rooms or FDP700 Hydro in humid environments like bathrooms and kitchens. Remember to select FX210 joint adhesive to get the best results. The coving profile is 1.5 x 1.5cm with a diagonal of 2.1cm. The C250 coving has a neat concave curve with a flat return top and bottom. Best suited to small rooms with low ceilings for example use as; bedroom coving bathroom coving kitchen coving hallway coving and coving for flats. The C250 coving can also be used as a beading in wall corners and panel edging. There is a curved coving option in the C250F flexible coving. Where curved coving or coving with a radius is required this is an ideal solution. Often a problem in curved bays where in the past only bespoke installations could be fitted. Orac flexible coving can be used to match the radius of the curved wall. The C250F flexible coving is made in the same moulds but using a rubberised material. Therefore the C250 rigid coving and C250F flexible curved coving can be used together to achieve both straight coving and curved coving as required. Length: 200cm Height: 1.6cm Width: 1.6cm