Makita DBO180Z 18v LXT 125mm Cordless Random Orbital Sander Body + Makpac Inlay

Simple to operate electronic push button switch with 3-speed settings.

Powered by Li-ion Battery BL1830

Connectable to dust extractor.

Compact design with short height and lower centre of gravity for better manoeuvrability.

Polishing operation:

Use only a Makita genuine sponge pad, felt pad or wool pad (optional accessories).

Always operate the tool at low speed to prevent work surfaces from heating abnormally.

Never force the tool. Excessive pressure may decrease the polishing efficiency and cause motor overload, resulting in tool malfunction.

Use an optional sponge pad. Apply wax to the sponge pad or work surface. Run the tool at low speed to smooth out wax

To remove wax use an optional felt pad. Run the tool at low speed to remove wax

To polish the surface Use an optional wool pad. Run the tool at low speed and apply the wool pad gently to the work surface

Sponge and wool pad available separate

No Batteries or Charger Included

Includes Makpac Inlay for Type 2 Makpac Case