See more Plaster
Limelite Easy Bond 5kg Pre-Mixed Keying
Sold & shipped by PAM TIES LIMITED
Available online only and not stocked in B&Q stores
Product details
Product information
Limelite Easy Bond is a breathable primer and keying aid designed to be used with the Limelite range of plasters. Limelite Easy Bond is a breathable, high bond primer designed to provide a durable bond between Limelite plasters and the substrate.
- Guarantee - 1 month
- Not paintable
- Mixing 5kg of Limelite Easy Bond should be mixed with 2.5 litres of clean, cool water. Once mixed, Limelite Easy Bond will give a working time of 15 minutes. Only mix the amount of material that can be applied in time. The performance characteristics of Limelite Easy Bond are dependent on temperature – higher or lower temperatures will result in reduced or extended setting times, respectively. Application Limelite Easy Bond should be brushed onto the substrate around 15 minutes before applying the first plaster coat. Limelite Easy Bond can also be applied by spray machine for covering larger areas faster.
- Dry powders should be swept up and disposed of in accordance with Local Authority regulations.
- Not resistant to impact
Features and benefits
Limelite Easy Bond is a breathable primer and keying aid designed to be used with the Limelite range of plasters. Limelite Easy Bond is a breathable, high bond primer designed to provide a durable bond between Limelite plasters and the substrate.
Effective bonding
Enables plastering onto smooth substrates where there is little key allowing effective adhesion of plaster coats.
Suction control and crack prevention
Helps to prevent shrinkage and cracking by controlling suction on dry, porous substrates such as sandstone or old brickwork.
Reduces efflorescence and staining
Contains a salt inhibitor to prevent surface efflorescence. Minimises the risk of sulphate attack and staining on plasters from contaminated substrates.
Breathable
Limelite Easy Bond is breathable and won’t seal moisture into the substrate like an impermeable SBR or latex base primer. It also won’t re-emulsify when damp like PVA based primer.
Easy to use
Limelite Easy-Bond is easy to use, only requiring the addition of water and is applied with a brush.
Responsibly sourced
All of our products are manufactured in the UK and certified under BES 6001 Responsible sourcing. Tarmac was the first company within the cement and lime sectors to be awarded the BES6001 ‘Excellent’ rating across its entire product range.
- High bond strength
- Rapid drying
- Easy to apply
- Salt resistant
- Easy Bond is part of the Limelite Breathable Plaster System, a system BBA approved eliminate damp and mould
- Easy to use
- Reduces efflorescence and staining
- Effective bonding
Specifications
Container type | Tub |
---|---|
Pack quantity | 1 |
Coverage | 14m² |
Drying time | 15 min |
Product weight | 5kg |
Location | Internal |
Ready for use | Requires preparation |
Standard | BBA |
Suitable surface | Wall |
Model name/number | LimeliteEasyBond5KG |
Number of coats | 1 |
Quick dry | Quick dry |
Sandable | Non-sandable |
Colour group | Grey |
VOC level | Low |
Volume | 5000L |
Product code | 0747356052887 |